This paper introduces the small or no valve clearance of Caterpillar excavator engine, the cause of early engine wear and the elimination method

 This paper introduces the small or no valve clearance of Caterpillar 325C excavator engine, the cause of early engine wear and the method of elimination

2023 CAT ET 2023A 2022A & 2019C Full Service Download and Installation Service

CAT Caterpillar ET 4 Diagnostic Adapter Truck Diagnostic Tool

 A

. The valve clearance is too small or there is no valve clearance The possible causes and solutions are as follows. Worn valve seat or valve face. The cylinder head needs to be repaired and the valve clearance adjusted. 

 

 B.

 Early engine wear The possible causes and solutions are as follows.

  (1) There is dirt in the lubricating oil. Drain the dirty lubricating oil. Install a new oil filter element.

  Add clean oil to the engine. 

 12.2021 Caterpillar ECM ECU Flash Files Full Set Download

 (2) Air inlet leaks. Check all gaskets and joints, and repair any leaks found. 

 (3) Fuel leaks into lubricating oil. This situation results in high fuel consumption and reduced engine 

oil pressure. If leaks are found, repair them. Install new parts if necessary.