How to install a CAT radiator and hydraulic oil cooler - CAT 320D2 Excavator

 SMCS - 1353-012; 1374-012  

S/N - DFM1-UP 

S/N - DNP1-UP 

S/N - EAL1-UP 

S/N - EKT1-UP 

S/N - ESG1-UP

 S/N - FKK1-UP 

S/N - GBA1-UP

 S/N - HDM1-UP

 S/N - JFM1-UP

 S/N - KHR1-UP 

S/N - LMA1-UP 

S/N - NBT1-UP S/N - TGJ1-UP 

S/N - TMF1-UP S/N - WDJ1-UP 

S/N - XAN1-UP S/N - XBB1-UP

 S/N - XCC1-UP 

S/N - YEA1-UP 

S/N - ZBD1-UP 

S/N - ZCS1-UP

 1. Install the radiator and hydraulic oil cooler assembly (17) using appropriate lifting equipment.

 Caterpillar ET 2025A & 2019C Electronic Technician Diagnostic Software Download and Installation  

 

 

                                          2. Install the bolts (18).

  CAT Comm Adapter 3 478-0235 Diagnostics for Caterpillar 

  

 

 

 

  3. Install the hose assembly (16).  

 

 

 

 

 

                                                     4. Install bolts (13) and (15). Install the cover (14).

 5. Install the panel (12). Install the cable tie (11). Connect the hose (8) to the pipe assembly (10) and tighten the hose clamps

 

6. Install the reservoir (4), and connect the hose assembly (3), pipe assembly (6), and (2). Install the hose assembly (5) and (1).

7. Add hydraulic oil. Refer to the Operation and Maintenance Manual, "Manual Hydraulic System - Filling".

 

  12.2021 Caterpillar ECM ECU Flash Files Full Set Download

End By: a. Install the condenser. b. Install the aftercooler. c. Install the fan. d. Install the engine hood.