Note: Use several washers between the tool (A) and the sprocket (2). This will prevent damage to the sprocket.
1. Connect the tool (A) to the sprocket (2) as shown. The sprocket (2) weighs approximately 40 kg (90 lb).
2. Place the sprocket (②) onto the final drive.
3. Install the bolt (1). Tighten the bolt (1) in alternating order to a torque of 530 ± 70 N·m (390 ± 50 lb ft).
4. Remove the tool (A).
5. Connect the tracks. See Disassembly and Assembly, "Track Connection".
6. Remove the stacker from the front track rollers.
