lift bracket mounting
Caterpillar ET 2024A & 2023C & 2019C Electronic Technician Diagnostic Software Download and Installation
Engine lift bracket mounting
SMCS-1122-012
Installation steps
Follow the installation steps for the installed engine lift bracket configuration.
Option 1
graph 1
View of the engine lift bracket at the front of the engine
Engine lift bracket view at the rear of the engine
graph 2
CAT Caterpillar ET 3 Diagnostic Adapter 317-7485/478-0235 Diagnostic Tool-high quality
1. Position the lift bracket (1) on the fan drive (3). Refer to Figure 1.
2. Install the bolts (2) on the lifting bracket (1) and tighten it manually. Tighten the bolts to a torque of 45 N·m (33 Ib
ft)。
3. Position the lift bracket (4) to the cylinder head. Refer to Figure 2.
4. Install the bolts (7) on the lift bracket (4) and tighten manually. Tighten the bolts to a torque of 65 N·m (48 Ib
ft)。
5. Position the lift bracket (5) to the cylinder head. Refer to Figure 2.
6. Install the bolts (6) on the lifting bracket (5) and tighten them manually. Tighten the bolts to a torque of 65 N-m (48 Ib
ft)。
graph 3
View of the engine lift bracket at the front of the engine
graph 4
Engine lift bracket view at the rear of the engine
1. Position the lift bracket (8) on the fan drive (10). Refer to Figure 3.
2. Install the bolts (9) on the lift bracket (8) and tighten manually. Tighten the bolts to a torque of 45N-m (33 Ib
ft)。
3. Position the lift bracket (11) to the flywheel housing. Refer to Figure 4.
4. Install the bolts (13) on the lift bracket (11) and tighten manually. Tighten the bolts to a torque of 110 N-m (81 Ibft).
5. Position the lift bracket (12) on the flywheel housing. Refer to Figure 4.
6. Install the bolts (14) on the lifting bracket (12) and tighten them manually. Tighten the bolts to a torque of 110 N·m (81 I b ft).
Caterpillar 18 Digits Factory Password Calculator One-Time Calculate Service
